The resistor is the lowest priced harness with 10 foot nylon straps available. It develops strength and power by "overloading" the muscles in the sprinting action. Thousands in use nation wide. Harness has 3 connection points.
Track covers take the beating in high-traffic areas! Let these Track Protectors take the beating in high-traffic areas so your track can stay smooth. Standard or Crossover sizing. Non-woven 16 ounce polypropylene. Top surface retains tough durability, even from cleats. Bottom surface will not leave loose fibers clinging to track surfaces. Heather gray color reflects heat. Binding is hemmed, weighted vinyl that lies flat and stays in place. Choice of 14 binding colors (specify): Maple Green, Royal Blue, Red, Navy Blue, Gray, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange.
Please allow 2 to 4 Weeks for Delivery
This product is not returnable
• Lifetime warranty!
• Made in the USA!
• Not a cheap import!
• Heavy duty 1" galvanized steel construction
• Large easy-swivel front casters
• Stores/transports up to 24 scooters
• Made of galvanized steel
• Measures 47" H x 30" W x 18" D
• 8" Rubber wheels
• Max cone base size = 11” x 11”
NOTE: Check the base size of your cones before ordering.
Lifetime warranty! Made in the USA! Not a cheap import! Heavy duty 1" galvanized steel construction. Large easy-swivel front casters. Stores/transports up to 24 scooters. Made of galvanized steel. Measures 47" H x 30" W x 18" D. 8" Rubber wheels. U.S. Pat. No. D578,270
• Holds 90 each 9", 12" or 15" poly cones
• Also holds 60 each 12" heavy-duty cones
• Two front easy-roll swivel casters
• 8" hard rubber tires
• 41 1/2”H x 24”W x 16”D
• Lifetime warranty!
• Made in the USA!
• Heavy duty construction
• Made of 1" heavy gauged galvanized steel
• Use indoors or out
• Max cone base size = 8" x 8"
NOTE: Check the base size of your cones before ordering.
This patented EZ-Roll Cone Cart has two front easy-roll swivel casters making it the perfect transports for moving your heavy 9", 12" and 15" poly cones around. The front casters allow you to easily turn corners and maneuver without needing to tilt the cart. Its 1 inch heavy gauged galvanized steel constructions means it will stand up to long-term heavy use. Proudly American Made right in our Ann Arbor Michigan factory!
• Holds 90 each 9”, 12” or 15” poly cones
• Will also hold 60 each 12” heavy-duty cones
• Durable 1" galvanized steel
• 8” hard rubber tires
• Lifetime warranty!
• Made in the USA!
• Measures 41 1/2”H x 24”W x 16”D
• Max cone base size = 8” x 8”
NOTE: Check the base size of your cones before ordering.
Store and transport your polyethylene cones with this durable convenient cart. Simply stack 9", 12" or 15" cones in the "stacking" racks. Durable 1" galvanized steel. Holds 90 each 9", 12" or 15" poly cones. Will also hold 60 each 12" heavy-duty cones. 8" hard rubber tires. Measures 41 1/2"H x 24"W x 16"D. Max cone base size = 8"x 8".
• 64" High target
• The portable lightweight target hoop is made of durable PVC and plastic.
• Versatile 24" diameter targets
• Target can be set up as a disc golf game, target hoop, obstacle, etc.
• Target includes numbered cone and steel ground socket.
• Some assembly required
• NOTE: Target hoop color may vary
• 52" High target
• The portable lightweight target hoop is made of durable PVC and plastic.
• Versatile 24" diameter targets
• Target can be set up as a disc golf game, target hoop, obstacle, etc.
• Target includes numbered cone and steel ground socket.
• Some assembly required
• NOTE: Target hoop color may vary
• 40" High target
• The portable lightweight target hoop is made of durable PVC and plastic.
• Versatile 24" diameter targets
• Target can be set up as a disc golf game, target hoop, obstacle, etc.
• Target includes numbered cone and steel ground socket.
• Some assembly required
• NOTE: Target hoop color may vary
• Will hold any of our GA540M 9-hole disc golf sets
• Made of durable galvanized steel
• The cart measures 55"H x 24"W x 21"D
• Has a pocket to hold up to 36 discs
• Has a pocket for all the PVC poles, a rack for hoop storage, and a tray to hold ground sockets.
• Cart also features large 8" rubber wheels for easy transport
• Indoors or outdoors.
• Made in the USA
Will hold any of our 9-hole disc golf sets. Made of durable galvanized steel, the cart measures 55"H x 24"W x 21"D. This unique cart has a pocket to hold up to 36 discs as well as a pocket for all the PVC poles in our set. includes a rack for hoop storage and a tray to hold 9 ground sockets. Cart also features large 8" rubber wheels for easy transport of an entire disc golf set anywhere - indoors or outdoors. Simply load, tip and roll to whatever location you want!
Starter set of 6 plastic corrugated pyramids with 6 Basic Fitness Circuit #1 laminated station cards. Some assembly required.
A safety option which can be installed on any Jammar rope providing an immediate back-up device should any ceiling hardware fail. Cable, splicers, and clamp.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 4 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
This 72” high pad fits post up to 1-3/4” diameter. The hook-and-loop fasteners make installing the pad easy. Perfect for portable game standards and tetherball posts. Covered with Safe-Gard™ LeatherLike™ fabric filled with polyurethane foam. The fabric is phthalate-free, flame retardant and anti-microbial.
This tough plastic shaft with lightweight fiberglass dowel can take any beating students can give it. Outdoor set has the same contents except 6 sticks with white blades and 6 sticks with black blades. All shafts are guaranteed for life and made in the USA!
This tough plastic shaft with lightweight fiberglass dowel can take any beating students can give it. Indoor set contains 6 sticks with red blades, 6 sticks with blue blades, 2 ABS goalie sticks and two speed control balls. All shafts are guaranteed for life and made in the USA!
Official size 8'H x 24'W x 3'D x 9'B. Meets NCAA, NFSHSA and FIFA specs. Front face is 4" round. Powder-Coated. Custom aluminum extrusion for superior strength. Backstays are 2" round powder coated aluminum. Rear crossbars are 2" round galvanized steel. Built-in net clip track with clips. Includes 4mm white nets and ground anchors. 360 lbs./pr
The strongest stick in North America! Clear plastic shaft with lightweight fiberglass dowel that matches the color of the blade! Outdoor set contains 6 sticks with black blades and black dowel, 6 sticks with white blades and white dowel and two speed control balls. All shafts are guaranteed for life and made in the USA!
Crucial to any athletic club or community center/soccer field, this pair of Alumagoal Round Club Soccer Goals lets players get right into the action. Young athletes can enjoy soccer excitement for years to come, as the durable aluminum construction withstands rough weather and the repeated impact of powerful shots on goal. Players can begin dribbling and shooting in no time thanks to the included net, net clips and ground anchors, which provide everything necessary to get the field set up in time for the big match.
•3 in. extruded aluminum front face
• 2 in. heavy-wall aluminum backstays withstand punishing games and practices
• Double-reinforced, TIG-welded corners and stainless-steel hardware
• 4mm white net installs easily with the built-in net clip track and included net clips
• Ground anchors keep the goals in place during windy conditions
• Available in a variety of sizes to accommodate players of all skill levels
• Includes Back Bottom Bar (24’, 21’ , 18.5’ & 12' models only)
• Meets NFSHSA specs (8’ x 24’ SGA300 model only)
8’H x 24’W x 3’D x 8.5’B – 330 lbs./pr
7’H x 21’W x 3’D x 7.5’B – 301 lbs./pr.
6.5’H x 18.5’W x 2’D x 7’B – 260 lbs./pr.
6.5’H x 12’W x 2’D x 7’B – 208 lbs./pr.
4.5’H x 9’W x 2’D x 4.5’B – 134 lbs./pr.
4’H x 6’W x 2’D x 4’B – 118 lbs./pr.
Give your gymnasium an extra layer of professionalism and protection. EnviroSafe Wall Padding is made of recyclable and recycled material in the United States. EnviroSafe wall padding costs no more than other standard urethane/poly foam panels.
Padding is 24" width x 60", 72", or 84" heights, 2.5" thickness. Foam is 2" Medium-Firm foam, and meets ASTM F-2440 for impact resistance (and option for class A E-84). All Pads are phthalate free and have an antibacterial covering. Available with 1" Nail Margin or Z-Clip mounting.
Specify Color: Maple Green, Royal Blue, Red, Navy Blue, Grey, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange. Please note that the colors shown may vary slightly. Ships freight.
Please allow 2 to 4 Weeks for Delivery
Pads are NOT returnable
12" Wide x 36" Tall - 12 Holes This deluxe pegboard is made in Ann Arbor Michigan from dried hard maple. Used in schools from coast to coast. We have been making them since 1961. Precision drilled and triple varnished. Board is hand-made, hand-finished and kiln dried so it won't warp or crack. Each board comes with one pair of pegs. Board is a full 1 1/2" thick. Mounting is simple, just use our mounting kit for concrete or brick walls (not included, order separately). CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.