Category

Filters

Playground Equipment Banner

Playground Equipment

17 products

Showing 1 - 17 of 17 products
View
Made in the USA
Rubber Enclosed Infant Swing SeatsRed  Enclosed Infant Swing Seat
Rubber Enclosed Infant Swing Seats
PG034P

• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
• Available in 6 Colors


This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.

Learn More
$189.95 Each
Choose options
Made in the USA
5/16" Vandal-Proof Rubber Swing SeatsBlack 5/16" Vandal-Proof Rubber Swing Seat
5/16" Vandal-Proof Rubber Swing Seats
PG030P

This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.

Learn More
$59.95 Each
Choose options
 - 3/8 inch - Large EndCommercial S-Hooks - 3/8 inch - Standard
Commercial S-Hooks
PG171P

This commercial quality S-hook is expertly crafted to fasten chain to swing hangers and swing seats, effectively preventing binding. Additionally, this S-hook is zinc plated, which enhances its ability to resist rust. It’s important to note that S-hooks bought from non-playground manufacturers may contain imperfections and may not be strong enough to endure playground conditions.

Our product boasts an estimated lifespan of up to 5 years in optimal conditions and 2 years in harsh conditions, although certain factors may necessitate replacement sooner. Whether for commercial or residential use, our S-hook is an essential component for your swing set to ensure safety and durability.

Tensile Strength
3/8" Standard = 1543 lbs.
3/8" Large Opening = 1177 lbs.
5/16" Standard = 1126 lbs.
5/16" Large Opening = 745 lbs.

Learn More
From $1.75 Each
Choose options
Coated Swing Chain - 5 1/2 feetRed 5.5' Coated Swing Chain
Coated Swing Chain
PG426P

These coated chains are perfect for adding a pop of color to any swing set. Available in 5 1/2 ft. or 8 1/2" lengths, the 3/16" chains are coated with 4 foot of bright polymer material sure to brighten up any swing set. The 3/16" chain is 4/O Aught and Grade 30. The links are 1" long and the opening is 1/2" wide, ensuring that it is compatible with most swing set hardware. 

It is essential to note that chain sourced from non-playground manufacturers may not possess quality control and may include weak links or air bubbles. Therefore, purchasing from us ensures that you receive high-quality, reliable equipment. 

These chains are sold individually, providing you with the flexibility to customize your equipment as required.

Learn More
From $35.95 Each
Choose options
Made in the USA
3/8" Strap Seat Rubber with Insert3/8" Strap Seat Rubber with Insert
3/8" Strap Seat Rubber with Insert
PG411P

Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.

To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.

EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.

Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.

Learn More
$62.95 Each
Choose options
Black Rotational Molded Flat Swing SeatBlue Rotational Molded Flat Swing Seat
Rotational Molded Flat Swing Seats
PG132P

This swing seat is a rotational molded swing made of polyethylene and has a new improved hanger. The dimensions of the seat are 19.75in x 9in x 2in thick. Space between hangers is 16 3/8in. These seats are made wider and studier to hold both small and large children. This seat meets ASTM Standards both commercially and residentially. The seat should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 3000 lbs.

Learn More
$118.95 Each
Choose options
Made in the USA
Rubber Bumper Swing SeatsRubber Bumper Swing Seats
Rubber Bumper Swing Seats
PG025P

This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.

Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.

The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.

Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.

Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.

Learn More
$65.95 Each
Choose options
Shackle Allen Wrench
Shackle Allen Wrench
PG176P

This allen wrench has a special hole to accept the pin in the shackle bolt head. Fits both shackles and shackle pendulum swing hangers.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.

Learn More
$5.50 Each
Ductile Iron Swing Hangers
Ductile Iron Swing Hangers
PG048P

Made of strong ductile iron and galvanized to prevent rust. These swing hangers feature an "oil-lite" bronze bearing and axle bolt. Threads into the frame with a nut for double protection and extra safety. Available in 2 3/8 inch and 3 1/2 inch sizes.

Learn More
From $31.95 Each
Choose options
Spring Loaded Connector ClipSpring Loaded Wide Opening Connector Clip
Spring Loaded Connector Clips
PG424P

These clips are available with a standard or wide opening. 

The Standard C
lips are 5/16” x 3″.  This clip will work on all chains.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 1662  lbs. 

The Wide Opening Clips are 3/8” x 4” with a wide opening to fit everything including swing hangers and washer seats. This clip can not be used with our 3/16" coated swing chains. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Tensile strength is 2900 lbs.

Learn More
From $2.75 Each
Choose options
5/16" Shackle w/ 3/8" x 1.5" Bolt5/16" Shackle w/ 3/8" x 1.5" Bolt
5/16" Shackle w/ 3/8" x 1.5" Bolt
PG174P

These forged steel shackles provide an alternative to S-hooks with their multiple use capabilities and ease of installation. Their added strength has led some cities and parks to require their use in place of S-hooks. The shackle has a 5/16″ diameter and is paired with a 3/8″ x 1 1/2″ bolt, with a 1/2″ opening at the bolt and up to 1″ at its widest point, allowing for use with chains up to 1/2″ in size. This shackle boasts a tensile strength of 12500 lbs. The shackle has a hardness rating of 212 HBS, while the bolt rates at 176 HBS. With proper use, this product is expected to last up to 5 years under optimal conditions and at least 2 years in harsher environments, although some conditions may require replacement sooner.

Learn More
$7.50 Each
Steel Safety Chain for Bucket Swing Seats
Steel Safety Chain for Bucket Swing Seats
PG069P

• Use to fasten children in half bucket swing seats
• Galvanized safety chain covered with a plastic hose
• Fastens across the front of half bucket seat
• The chain is 1/8” and is 12” long
• Weight: .35 lbs.
• Tensile strength: 295 lbs.


Use to fasten children in half bucket swing seats. This galvanized safety chain comes covered with a plastic hose. It has a snap hook and 2 S-hooks for fastening across the front of half bucket seat. The chain is 1/8” and is 12” long. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Weight .35 lbs. each. Tensile strength 295 lbs.

Learn More
$7.95 Each
Tire Eye BoltTire Eye Bolt Dimensions
Tire Eye Bolts - Set of 3
PG423P

Made to be mounted on tires to connect chains to the tire swivels. Each 3-piece set has an eye bolt, a 2 1/2" bottom washer and a lock tight nut. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Weight is 2 lbs. per set. Tensile Strength 1400 lbs.  Sold in sets of three.

Learn More
$39.95 Each
H-Shackle w/ Special HeadH-Shackle w/ Special Head
H-Shackle w/ Special Head
PG175P

These shackles take the place of S-hooks and need the wrench, PG176P, to open and close. This head makes removal, because of vandalism, more difficult. The overall length is 3 5/16”. The bolts are 3/8” diameter. The inside of the smaller opening is ½” across and the larger opening is ¾”. Unlike S-hooks they can be used multiple times. They are also much easier to install then S-hooks and much stronger. Some cities and parks are requiring their use instead of S-hooks. Use with our swing hangers and chain.  The shackle is 212 HBS and the bolt is 176 HBS.  The hardness of the bolt in the long needle hardness HRC29 / short needle hardness HRC31.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Tensile strength 6800 lbs.

Learn More
$9.95 Each
Wood Beam Swing Hanger
Wood Beam Swing Hanger
PG046P

Made of strong ductile iron and galvanized to prevent rust. Feature an "oil-lite" bronze bearing and axle bolt NOTE: Must be attached to an appropriate beam surface and bolted through with washers and nuts.

Learn More
$23.95 Each
Swing ChainSwing Chain
Swing Chain
PG178P

Our swing chains have a smooth zinc finish.

5/16" Short Link Chain
The 5/16" chain has very short links to deter small children from putting their fingers in the links and injuring themselves if they fall off the swing. In Germany and the Netherlands this type of chain is required on playground equipment. National test lab results 5000 lb.. Sold per foot.

3/16″ Chain
Our 3/16″ Trivalent chain is zinc plate chain with trivalent coating that has a much improved resistance to salt spray. This chain meets all ASTM requirements. The coating has a consistent bright finish. This chain would be good in coastal areas. The chain is 4/0 Aught and Grade 30. The links are 1” long and the opening is ½” wide. Any of our S-hooks or Shackles will work with this chain. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile 3200 lbs.. Sold per foot.

Learn More
From $2 Foot
Choose options
Made in the USA
Bucket Rubber Swing SeatsBucket Rubber Swing Seat - Black
Bucket Rubber Swing Seats
PG416P

• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 4 Colors


An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.

Learn More
$101.95 Each
Choose options