Category

Filters

under-10
Playground Equipment Banner

Playground Equipment

18 products

Showing 1 - 7 of 7 products
View
7 results
Shackle Allen Wrench
Shackle Allen Wrench
PG176P

This allen wrench has a special hole to accept the pin in the shackle bolt head. Fits both shackles and shackle pendulum swing hangers.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.

Learn More
$3.60 Each
5/16" Shackle w/ 3/8" x 1.5" Bolt5/16" Shackle w/ 3/8" x 1.5" Bolt
5/16" Shackle w/ 3/8" x 1.5" Bolt
PG174P

These shackles take the place of S-hooks. Unlike S-hooks they can be used multiple times. They are also much easier to install than S-hooks. They are stronger and some cities and parks are requiring their use instead of S-hooks. This shackle is 2 1/8” long. The ID is 3/4” and the opening is ½”. This shackle works with our swing hangers and chains.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 8000 lbs.

Learn More
$5.10 Each
Spring Loaded Connector ClipSpring Loaded Wide Opening Connector Clip
Spring Loaded Connector Clips
PG424P

These clips are available with a standard or wide opening. 

The Standard C
lips are 5/16” x 3″.  This clip will work on all chains.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 1662  lbs. 

The Wide Opening Clips are 3/8” x 4” with a wide opening to fit everything including swing hangers and washer seats. This clip can not be used with our 3/16" coated swing chains. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Tensile strength is 2900 lbs.

Learn More
From $2.09 Each
Choose options
H-Shackle w/ Special HeadH-ShackleMeasurements
H-Shackle w/ Special Head
PG175P

These shackles take the place of S-hooks and need the wrench, PG176P, to open and close. This head makes removal, because of vandalism, more difficult. The overall length is 3 5/16”. The bolts are 3/8” diameter. The inside of the smaller opening is ½” across and the larger opening is ¾”. Unlike S-hooks they can be used multiple times. They are also much easier to install then S-hooks and much stronger. Some cities and parks are requiring their use instead of S-hooks. Use with our swing hangers and chain.  The shackle is 212 HBS and the bolt is 176 HBS.  The hardness of the bolt in the long needle hardness HRC29 / short needle hardness HRC31.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Tensile strength 6800 lbs.

Learn More
$6.75 Each
 - 3/8 inch - Large EndCommercial S-Hooks - 3/8 inch - Standard
Commercial S-Hooks
PG171P

Commercial quality S-Hooks are designed to fasten chain to swing hangers and swing seats without binding.

Learn More
From $1.09 Each
Choose options
Swing ChainSwing Chain
Swing Chain
PG178P

Our swing chains have a smooth zinc finish.

5/16" Short Link Chain
The 5/16" chain has very short links to deter small children from putting their fingers in the links and injuring themselves if they fall off the swing. In Germany and the Netherlands this type of chain is required on playground equipment. National test lab results 5000 lb.. Sold per foot.

3/16″ Chain
Our 3/16″ Trivalent chain is zinc plate chain with trivalent coating that has a much improved resistance to salt spray. This chain meets all ASTM requirements. The coating has a consistent bright finish. This chain would be good in coastal areas. The chain is 4/0 Aught and Grade 30. The links are 1” long and the opening is ½” wide. Any of our S-hooks or Shackles will work with this chain. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile 3200 lbs.. Sold per foot.

Learn More
From $2 Foot
Choose options
Steel Safety Chain for Bucket Swing Seats
Steel Safety Chain for Bucket Swing Seats
PG069P

• Use to fasten children in half bucket swing seats
• Galvanized safety chain covered with a plastic hose
• Fastens across the front of half bucket seat
• The chain is 1/8” and is 12” long
• Weight: .35 lbs.
• Tensile strength: 295 lbs.


Use to fasten children in half bucket swing seats. This galvanized safety chain comes covered with a plastic hose. It has a snap hook and 2 S-hooks for fastening across the front of half bucket seat. The chain is 1/8” and is 12” long. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Weight .35 lbs. each. Tensile strength 295 lbs.

Learn More
$5.50 Each