Fitness & Agility

Designed to allow athletes consistent resistance throughout their acceleration training while still reaching full speed. Lets athletes improve stride frequency, strength, and form. While wearing the harness with the handle attached from the athlete's back to their partner, the athlete sprints forward. The partner holding the handle in one hand and the quick release strap in the other can then release the strap at any point, allowing the athlete to continue sprinting to full speed. Includes one (1) 10-foot Quick Release Power Handle and one (1) Universal Shoulder Harness.

Similar to the Resistance trainer but has the coach activated quick release feature. Great for power running and then explosive, quick starts.

The resistor is the lowest priced harness with 10 foot nylon straps available. It develops strength and power by "overloading" the muscles in the sprinting action. Thousands in use nation wide. Harness has 3 connection points.

Put a new emphasis on lightning-fast starts and acceleration with a longer rubber cable! With a 16-foot cable safely stretching to 48 feet, the Maxi-Speed is great for assisting athletes off the line, short sprint drills, and acceleration development. The Maxi-Speed features a Safety Loop System on one end that provides a unique self-forming belt with no hardware to break or remove. Simply step into the loop, position the padding around your waist, and pull the choke toward you.

4' long rope loop spliced on hitching ring and clasp - to loop around coiled rope and hang on bracket (AG072D). Bracket not included.

Attach to the wall and run your conditioning rope through it to turn one rope into two.

• Provides a low impact high cardio workout.
• System created by John Brookfield and his "battling ropes"
• Amp up the heart and burn large muscle carbs.
• Use as a single rope or double it for 2 half length ropes when working solo.
• Can also work in pairs.
• Premium rugged non-shed polydacron.
• Available in 2 colors, 2 thicknesses, and 3 lengths

New heart pounding strength and conditioning product which provides a low impact high cardio workout through various easy drills. System created by John Brookfield and his "battling ropes" program allows you to whip large diameter ropes into unlimited wave motions which amp up the heart and burn large muscle carbs. Pick the size of rope to the size of your space and the progression of workout. Ex. 50' rope is doubled for two 25' sides when working solo. Can also work in pairs. Premium rugged non-shed polydacron.

Sets of 6 laminated station cards only. These card sets do not include the pyramid cones - order separately.

Starter set of 6 plastic corrugated pyramids with 6 Basic Fitness Circuit #1 laminated station cards. Some assembly required.

Attractive black vertical dumbbell rack offers an excellent racking options for rubber hex and chrome dumbbells. Features all-steel construction with a sturdy bolt-together design. Dumbbell rests are covered with durable nylon wear guards to prevent scratches on dumbbell handles. Anti-pinch design. Hold 8 pairs of rubber hex (through 35lb) or chrome dumbbells (through 50lb) in an easily accessible vertical position. 16.5"D x 27"W x 44.5"H. 
NOTE: Dumbbells not included

• This A-frame dumbbell rack holds 6 pairs of dumbbells
• Easy-to-access double sided format
• Duel stability bars and sturdy feet keep this rack from tipping.
• The attractive black finish complements most decor.

This convenient rack accommodates six pairs of Rubber Hex or Chrome Dumbbells. The rack features all-steel construction with a sturdy bolt-together design. Dumbbell rests are covered with durable plastic wear guards to prevent scratches on dumbbell handles. Holds 6 pairs of Rubber Hex or Chrome Dumbbells in an easily accessible vertical position. Available in black only. 16.5"D x 27"W x 44.5"H.
NOTE: Dumbbells not included

• Dimensions: 56” L x 23” W x 29” H
• Frame Construction: 2” x 2” x 13 gauge steel tubing
• Frame Fabrication: Mig Welded and bolted for maximum strength
• Trays: Heavy-duty angle iron with a depth of 16"
• Frame Finish: Black only
• Feet: Includes rubber non-skid feet
• Uses: Residential and Light Commercial
• Capacity: Holds up to 10 pairs (5-50 lbs.) dumbbells
• Unit Weight: 80 lbs.
• Shipping Dimensions (boxed): 53" x 13" x 9"

This Two-Tier Dumbbell Rack by York Barbell is built and designed to store up to 10-pairs of iron hex, rubber hex or York Legacy dumbbells in a home or light commercial application such as a small training studio. The steel frame is constructed from 2” x 2” x 13 gauge tubing. Dumbbell tiers, or “trays”, are fabricated from thick angle iron that are set at a slight angle to make dumbbell access easy. The rubber boots help balance the rack on uneven floors and will also avoid scratches if putting on a tile or hardwood floor. 
NOTE: Dumbbells not included

• Great for group fitness classes
• Ideal for muscle and strength training, improving flexibility, and stretching
• Promotes safe stretching and form and can be useful when rehabilitating injuries
• All bands are 42" long

Add resistance training to any workout with these 42" long Stretch Training Bands. From group classes with a focus on cardio and maintenance to strength training or rehabilitating injuries, these multi-use resistance bands are great for ensuring proper form and improving flexibility and overall fitness.

• Weaves 4 strands of SPRI's Tuff Tube together.
• For higher demand tubing exercises that regular tubing can't handle
• Enhanced tubing lifespan and integrity
• Silver metallic and Yellow
• Resistance: Very Light

The SPRI  Braided Xertube® braided resistance bands offers all the same benefits as other braided exercise bands, and then some. The braided rope-like construction makes this the toughest tube in the braided resistance bands market. The handle not only provides comfort, but also allows all four tubes to come through the connector independently, making the SPRI Braided Xertube® durable enough for any type of braided resistance bands exercise. Anchor our resistance bands to any secure object, step on it, or use with a partner for variety in your resistance bands training. Color-coded resistances range from very light to ultra-heavy. Sold individually.

Measurements: 50"L x 5" Handles. 

Five color-coded resistances:

Resistance	Level	Weight Equivalent	Color
Very Light	1	+ / - 12.5lbs	Yellow
Light	2	+ / - 25lbs	Green
Medium	3	+ / - 37.5lbs	Red
Heavy	4	+ / - 50lbs	Blue
Very Heavy	5	+ / - 62.5lbs	Purple

 

 

For use with GY149M Mount pegboards on brick or concrete walls. Contains screws to attach backplate to board, lead screw anchors to sink in wall (after drilling holes) and screws to attach plate and board flush with wall . 6" & 12" boards mount at the ends. Complete with all hardware for mounting pegboard to brick or concrete. UPS. CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.

For use with GY124M Mount pegboards on brick or concrete walls. Contains screws to attach backplate to board, lead screw anchors to sink in wall (after drilling holes) and screws to attach plate and board flush with wall . 6" and 12" boards mount at the ends. Complete with all hardware for mounting pegboard to brick or concrete. UPS. CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.

6" Wide x 72" Tall - 29 Holes This deluxe pegboard is made in Ann Arbor Michigan from dried hard maple. Used in schools from coast to coast. We have been making them since 1961. Precision drilled and triple varnished. Board is hand-made, hand-finished and kiln dried so it won't warp or crack. Each board comes with one pair of pegs. Board is a full 1 1/2" thick. Mounting is simple, just use our mounting kit for concrete or brick walls (not included, order separately). CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.

12" Wide x 36" Tall - 12 Holes This deluxe pegboard is made in Ann Arbor Michigan from dried hard maple. Used in schools from coast to coast. We have been making them since 1961. Precision drilled and triple varnished. Board is hand-made, hand-finished and kiln dried so it won't warp or crack. Each board comes with one pair of pegs. Board is a full 1 1/2" thick. Mounting is simple, just use our mounting kit for concrete or brick walls (not included, order separately). CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.

Raise ropes to wall or ceiling after use for easy storage and elimination of possible misuse. Two wall brackets, 60' cordage with weighted end.

A safety option which can be installed on any Jammar rope providing an immediate back-up device should any ceiling hardware fail. Cable, splicers, and clamp.

The Adjustable Beam Clamp is made of steel with 1/2-13 threaded rod for adjustment, secured and locked into position with serrated flange locknuts. The beam clamp is constructed of heavy gauge steel brackets with a 5/8” OD steel ring to easily connect climbing ropes or nets. Brackets supplied with a durable black powder coat finish.

These beam clamps are specifically designed to mount to horizontal beams and withstand vertical loading. These beams clamps are not intended for angled / sloped beams or with any equipment involving swinging. Please refer to the specific net or rope installation for the recommended number of clamps for each specific piece of Jammar equipment.

Climbing ropes and nets must be hung from structurally adequate framework which will exceed any load placed on the equipment. Most beams and ceiling framework in institutional buildings will meet this criteria, however, always confirm this with you architect, building plans, and / or structural engineering. Jammar is not responsible for the structural adequacy of the building structure.

Features:

• Adjusts via 1/2″ threaded rod to fit 3-1/2″ to 12″ wide beam flanges
• Constructed of heavy gauge steel brackets with a 5/8” OD steel ring
• Welded ring for easy connection to climbing ropes and net hardware
• Designed to mount to horizontal beams and withstand vertical loading

Rated for 2000 lbs vertical load

The Gymnic Plus Ball represents the technical evolution of the Gymnic Classic. Besides the usual features of elasticity and performance, this version provides a higher safety in case of puncture thanks to the Burst Resistant Quality material. For this reason it is a perfect tool for all applications in fitness, physical therapy, active seating.

Allows for a wide range of exercises to improve balance, coordination, flexibility and stabilization; Activate more muscles with each move and burn more calories. Phthalate and BPA free; Made from burst-resistant, latex-free, vinyl which supports a maximum weight of 270 lbs. Ages 12 and up.

First born of the Gymnic line, this ball is a useful tool to help recovery from neurological and orthopedic pathologies as well as a valuable support in the treatment of muscular dystrophy. Recommended for rehabilitation purposes, pain therapy, strength training, maintenance motor activities, Pilates method, functional and athletic training.  Ages 12 years and up. Comes deflated air pump required.

Blend all your favorite cardio options...low-impact, step patterns and cardio dance...all using the BOSU Balance Trainer to enhance the challenge and increase variety. Rob will lead you through expressive, power-packed choreography that fuses athletic and dance moves with dynamic balance and stabilization. 57:56 min.