Equipment for Endless Fun and Games
Without the proper equipment, a gym is just a gym and a field is just a field. Make the most of the spaces you have with Wolverine's selection of gym and field equipment. Find benches, tables, and bleachers; floor tape and field markers; signs and crowd control options; and even first aid supplies and trash receptacles! We have all the gear you need for awesome indoor and outdoor activities.
Mark fields and surfaces with ease using Aerosol Spray Marking Chalk—the reliable choice for temporary, high-visibility lines.
-
Safe & Versatile – Specially formulated for synthetic turf, but also works great on artificial grass, pavement, soil, and gravel.
-
Easy to Remove – Water-based formula washes away quickly with pressure washing, leaving no lasting marks or damage.
-
Convenient Aerosol Design – Enjoy the speed and portability of an aerosol can with a universal tip that fits all striping machines and marking wands.
-
Clean & Reliable – Non-clogging and non-flammable for smooth, consistent spray every time.
Each disposable 20 oz. can (18 oz. net weight) delivers professional-quality markings without the hassle of messy powders. Sold in cases of 12 cans.
⚠️ Ground shipments only.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 5 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
• 100' long sections
• Plastic pennants are 18" long
• Blue, Yellow, Red, Green & White.
• Dress up your field, control crowds, etc.
Plastic pennants are 18" long in a variety of colors: Blue, Yellow, Red, Green and White. Dress up your field, control crowds, etc. Order In 100' lengths, or a pack of ten 100' lengths and save.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.