Equipment for Endless Fun and Games
Without the proper equipment, a gym is just a gym and a field is just a field. Make the most of the spaces you have with Wolverine's selection of gym and field equipment. Find benches, tables, and bleachers; floor tape and field markers; signs and crowd control options; and even first aid supplies and trash receptacles! We have all the gear you need for awesome indoor and outdoor activities.
The heavy-duty galvanized steel hopper prevents rust and corrosion. Cast aluminum paddle wheel feeds a steady stream. Two 8" diamond tread rubber wheels with steel rims for maximum stability. 25 lb. capacity, 2" line.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
This allen wrench has a special hole to accept the pin in the shackle bolt head. Fits both shackles and shackle pendulum swing hangers. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.
These clips are 5/16” x 3″. This clip will work on all chains. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 1662 lbs.
- Perfect complement to line markers
- Wound by one person with ease
- 450' of durable nylon twine
The perfect complement to line markers. Durable ABS case keeps the string fully enclosed to prevent damage. This is wound by one person with ease. The nail stores on the side of the unit for safe keeping. Comes with 450' of durable nylon twine.
Designed by Sports Trainers! This comprehensive first aid kit was designed by athletic trainers to meet the needs of large classes and teams.
Set contains instant cold packs, knuckle bandages, butterfly bandages, after bites, tongue depressors, Tuf-Skin, tape underwrap, antiseptic towelettes, 3" x 3" gauze pads, fingertip bandages, scissors, antibiotic creams, tape, Sam Finger Splint, Acetominophen, 3/4" x 3" bandages, 2" x 4 1/2" bandages, alcohol prep pads, latex gloves, 3" elastic wrap, Skin Lube Lubricant, triangle bandage, and a Sports Injury Care Handbook. SIZE: 15 3/4"L x 6"W x 10"H.
Made to be mounted on tires to connect chains to the tire swivels. Each 3-piece set has an eye bolt, a 2 1/2" bottom washer and a lock tight nut. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Weight is 2 lbs. per set. Tensile Strength 1400 lbs. Sold in sets of three.
Vinyl Floor Marking Tape is perfect for marking your gym floors, courts, or any hard smooth surface. Made of tough vinyl, this floor tape comes off clean and won’t scuff your floors, but is strong enough to hold up to foot traffic and equipment. This tough vinyl tape is the thrifty answer for marking floors WITHOUT PAINTING. You can put it down easily in straight lines or in a curve. Available in 3 sizes and 7 colors. For INDOOR use only.
WARNING: Tape should not be used on recently finished floors. It is also necessary to consult a floor finishing expert before using tape on your floor in order to assess risk to floor. In addition, you should test tape on a small portion of your floor before applying any tape.