• A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester
• The lines have hooks for easy holding and control of the gymnast
• Heavy-weight D-rings and swivel clips make it easy to aid young gymnasts
• A must for spotting and a must for teaching gymnastics
• Nylon guide lines on each side are 5 feet long with grip loops
• Available in 4 Sizes
• Available in 7 colors
A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester. The lines have hooks for easy holding and control of the gymnast. Heavy-weight D-rings and swivel clips make it easy to assert and aid gymnastic activities. A must for spotting and a must for teaching. Nylon guide lines on each side are 5 feet long with grip loops.
Because the belt is not attaches the ceiling the student can do tricks down the mat with the teacher running beside them. A great tool to teach back-bend. spider walk, front limber, front walkover, front changing walkover, back walkover, back changing walkover, nip up, snap down back handspring, aerials and many others. You can also teach round-off back handspring with the belt. You can spot this with one spotter but two is better.
NOTE: These belts are not to be hung or attached to ceiling or above apparatus. Belts must be used with protective padding. All activities using these belts must be strictly controlled and supervised by qualified adult instructors. Belts are intended for floor spotting and low beginner beam spotting, not higher spotting. Weight limit of 150 pounds.
• Made with 100% PVC polyvinyl chloride (contains no phthalates)
• Conical and top of base is one continuous layer
• Brilliant color with UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Wide body design ensures stability
• Able to return to their original shape after impact
• Will not mar floors.
• Use as a traffic cone, or for hundreds of phys ed activities
• Available in 3 size
6" high with 6" square base
12" high with 8.25" square base
18" high with 10.75" square base
These colorful cones are constructed of tough weatherproof flexible vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors. Virtually indestructible. Will collapse under pressure then spring back into shape. Easy stacking. Can be used for lane markers, crowd control, obstacle courses, boundary markers, marking danger areas, repair areas and driver training.
• Great for setting up training stations in gym class
• Use for teaching court positioning
• Can be used for a variety of drills and games
• Made of non-skid fade resistant vinyl
• Won’t tear or rip
• Available in 2 sizes and 6 colors
• Sold in dozen lots only
This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.
Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.
To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.
EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.
Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.
18 oz. double-sided vinyl coated nylon. Double-ply multiple stitch handles. Suitable for junior high through college. Maximum protection for the upper body. Excellent for training with restrained contact. Built using durable polyfoam and 18 oz. coated vinyl. 2 padded web handles. Dimensions: 24" x 16" x 4" (3 lbs.). Specify color.
PLEASE ALLOW 4 TO 6 WEEKS FOR DELIVERY
• 16" high pyramid cones
• Collapsible and stores flat
• Slot-and-tab assembly
• Can be used for activities like targets, hurdles, or goals
• Some assembly required
• Sets of 6 cones in six colors
These 16" high pyramid cones make physical activity fun and fast. An economical way to get students moving and keep them in top condition. Collapsible and stores flat. Slot-and-tab assembly. Can be used for activities like targets, hurdles, or goals. These plastic corrugated pyramids are available in sets of six. Some assembly required.