Our gym & obstacle course style indoor/outdoor climbing ropes are fabricated using quality 1.5″ diameter 3-strand twisted poly Dacron rope. Our poly Dacron is chosen for its excellent moisture and UV resistance. One of the best gripping synthetic ropes and holds up well to abrasion. Each top has rope eye spliced and each bottom has a poly boot cover or braided back bottom to deter unraveling.
Top Options
- Loop Top: Top has a spliced rope eye.
Grip Knot Options
All Ropes are available with rest grips or knots. Secure your climbing rope with proper safety cables, hoists, links, and clamps for a safe, challenging workout.
- No Knots: Traditional rope with no knots. Tougher and more challenging.
- Rest Grip Knots: Woven grip knots are 3 ply, hand-woven on rope using durable braided rope extending approximately 3/8″ from surface for hand grips and foot holds when ascending & rest areas descending. Standard spacing is every 18” although they can be custom placed anywhere on the rope.
-
Big Knots: Large overhand knots fabricated from 3-strand rope tied into the rope itself creating large platforms. Standard spacing is every 18” although they can be custom placed anywhere on the rope.
IMPORTANT NOTE: Ropes with Big knots will appear shorter than requested size. To realize full size, install and apply the weight of an adult until knots are tight and rope has stretched. To shorten rope, tie an additional knot at top of rope. To lengthen rope, untie a knot at top of rope. Each knot uses 1′ of material.
When determining rope length, note that gymnastics rules state that climbing ropes without bottom knots should be long enough so that at least 42in of rope is on the floor. Regular Gymnasium Climbing ropes should hang 1ft above the floor.
Adult supervision and safety padding should be utilized at all times.
NOTE: For indoor or Outdoor use.
Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.
To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.
EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.
Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 5 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.