• A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester
• The lines have hooks for easy holding and control of the gymnast
• Heavy-weight D-rings and swivel clips make it easy to aid young gymnasts
• A must for spotting and a must for teaching gymnastics
• Nylon guide lines on each side are 5 feet long with grip loops
• Available in 4 Sizes
• Available in 7 colors
A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester. The lines have hooks for easy holding and control of the gymnast. Heavy-weight D-rings and swivel clips make it easy to assert and aid gymnastic activities. A must for spotting and a must for teaching. Nylon guide lines on each side are 5 feet long with grip loops.
Because the belt is not attaches the ceiling the student can do tricks down the mat with the teacher running beside them. A great tool to teach back-bend. spider walk, front limber, front walkover, front changing walkover, back walkover, back changing walkover, nip up, snap down back handspring, aerials and many others. You can also teach round-off back handspring with the belt. You can spot this with one spotter but two is better.
NOTE: These belts are not to be hung or attached to ceiling or above apparatus. Belts must be used with protective padding. All activities using these belts must be strictly controlled and supervised by qualified adult instructors. Belts are intended for floor spotting and low beginner beam spotting, not higher spotting. Weight limit of 150 pounds.
• Length: 29", 32", or 37"
• Available in Black,Blue,Red,Yellow,Green, and Orange
• Extremely durable colored putter
• Tempered step chrome shaft
• No punch-thru grip
• Space age urethane head
• Outwears other non-metal clubs
• Also reduces marks and damage to surfaces
This mini-golf putter is extremely durable with a tempered step chrome shaft, no punch-thru grip, and a space age urethane head that is softer yet it outwears other non-metal clubs. Also reduces marks and damage to surfaces.
Suggested Sizes
37" - Men
32" - Women
29" - Junior (Age 10-12)
• Made with 100% PVC polyvinyl chloride (contains no phthalates)
• Conical and top of base is one continuous layer
• Brilliant color with UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Wide body design ensures stability
• Able to return to their original shape after impact
• Will not mar floors.
• Use as a traffic cone, or for hundreds of phys ed activities
• Available in 3 size
6" high with 6" square base
12" high with 8.25" square base
18" high with 10.75" square base
These colorful cones are constructed of tough weatherproof flexible vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors. Virtually indestructible. Will collapse under pressure then spring back into shape. Easy stacking. Can be used for lane markers, crowd control, obstacle courses, boundary markers, marking danger areas, repair areas and driver training.
These Vinyl-Coated Fitbells offer a bright colorful coating that will not only complement any workout space but also provide extended durability and comfort. Vinyl Fitbells are easy to clean. Perfect for aerobics or fitness. Sold in pairs. Colors might vary from those shown in the pictures.
• Great for setting up training stations in gym class
• Use for teaching court positioning
• Can be used for a variety of drills and games
• Made of non-skid fade resistant vinyl
• Won’t tear or rip
• Available in 2 sizes and 6 colors
• Sold in dozen lots only
• Great for setting up training stations in gym class
• Use for teaching court positioning
• Can be used for a variety of drills and games
• Made of non-skid fade resistant vinyl
• Won’t tear or rip
• Available in 6 colors
• Sold in dozen lots only
• Rugged, heavy-duty vinyl throw-down bases
• Great indoors or outdoors
• Lightweight yet virtually indestructible
• Set of 3 square bases and 1 home plate
• Homeplate = 16.75" x 16.75" x 0.25"
• Bases = 12" x 12" x 0.25"
• Available in 7 colors
• Breathable nylon reinforced vinyl
• 2" Heavy web shoulder strap
• Grommets with tie cord
• 52"L x 18" Diameter
• Will hold 25 soccer balls, 17 basketballs, 25 volleyballs or 32 footballs
• Available in 5 Colors
• 24" Red or blue domed bases with wheels
• Wheels allow for easy transport - just tilt and roll
• Ideal for small net games
• Uprights are 1 3/4" x 6' heavy wall galvanized
• Set includes 2 bases, 2 poles, 4 adjustable net holders and rubber rims to protect finished floors
• Note: To be used for small net games only. Not to be used for volleyball.
These 24" domed bases have wheels that allow you to easily move and transport the bases. Simply "tilt and roll." Set includes 2 bases, 2 - 6" poles, 4 adjustable net holders and 2 rubber rims. Note: To be used for small net games only. Not to be used for volleyball. Each base with pole weighs approximately 33 lbs.
Nets not included
Order Badminton nets HERE
• 2-Color reversible poly arrows
• Stick to floors easily
• Great for setting up training stations in gym class
• Use for teaching court positioning
• Can be used for a variety of drills and games
• Made of non-skid fade resistant vinyl
• Won’t tear or rip
• 6.65" x 13.65 long
• Sold in eaches.
• For badminton, deck tennis, and other small net games.
• 1 3/4" galvanized risers, heavy steel base plate, floor tips.
• Sets include 2 bases, two 6" poles and 4 adjustable net holders.
• Note: To be used for small net games only. Not to be used for volleyball.
For badminton, deck tennis, and other small net games. 1 3/4 inch galvanized risers, heavy steel base plate, floor tips. Sets include 2 black bases, two 6 ft poles and 4 adjustable net holders. Note: To be used for small net games only. Not to be used for volleyball. Available in 3 colors.
This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.
• 24" Red or Blue domed bases
• Ideal for small net games
• Uprights are 1 3/4" x 6' heavy wall galvanized
• Set includes 2 bases, 2 poles, 4 adjustable net holders and rubber rims to protect finished floors
• Note: To be used for small net games only. Not to be used for volleyball.
24" red or blue domed bases. Ideal for small net games. Uprights are 1 3/4" x 6' heavy wall galvanized. Set includes 2 bases, two 6' poles, 4 adjustable net holders and rubber rims to protect finished floors. Note: To be used for small net games only. Not to be used for volleyball. Each base with pole weighs approximately 33 lbs.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
• Available in 6 Colors
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.
To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.
EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.
Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.
• Comfortably covers the nose & mouth
• Protects from airborne pollution, dust, pollen, and other particles
• Measure 7" x 3 3/4" (approx.) when folded and expand to 7" by 6 3/4" (approx.)
• Around the head elastic for a snug comfortable fit
• Made from 100% cotton material
• Has an overlapping opening in the back to insert a filter (not included)
• Reusable and machine washable
• Available in white, and shades of pink, brown & blue (color may vary slightly)
• Made in USA
• One size fits most adults
These reusable, Cloth Face Masks comfortably cover the nose & mouth for protection from airborne pollution, dust, pollen, and other particles. The masks measure 7" x 3 3/4" (approx.) when folded and expand to 7" by 6 3/4" (approx.) They're made from 100% cotton material with an overlapping opening in the back to insert a filter (not included). Machine wash and air dry. Can be ironed (avoiding elastic). Available in white, and shades of pink, brown & blue (color may vary slightly). Has an around the head elastic to hold the mask snugly in place. These masks are made in USA. One size fits most adults.
NOTICE: These masks are considered an improvised form of personal protective equipment (PPE), and do not meet the standards of FDA cleared devices designed and tested for this purpose. They are not intended for treatment or prevention of illness, and by purchasing them the customer acknowledges and accepts this. Masks are not returnable, due to health and sanitary reasons.
• 40"L x 28"W x 36"H
• Made of durable heavy-wall PVC
• Removable nylon liner
• Clear 4 1/4" x 11" message pocket that can be put on any side of the cart
• Easy room-to-room mobility
• Easily roll into gym closets, locker rooms or storage areas
• Can also be used for laundry room items
• Includes four large easy-roller casters
• Available in 7 colors
• Rugged, heavy-duty vinyl throw-down bases
• Great indoors or outdoors
• Lightweight yet virtually indestructible
• Set of 3 square bases and 1 home plate
• Homeplate = 16.75" x 16.75" x 0.25"
• Bases = 12" x 12" x 0.25"
• Rainbow pack of 6 sets (1 ea. red, yellow, blue, green, orange, and purple)
Rugged, heavy-duty vinyl throw-down bases. Great indoors or outdoors. Bright color. Lightweight yet virtually indestructible. Six sets of 3 square bases and 1 home plate. Bases are set with a waffle pattern on top. Bases are made of poly vinyl, and are latex free. Each set is approximately 6 lbs.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 4 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.