• A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester
• The lines have hooks for easy holding and control of the gymnast
• Heavy-weight D-rings and swivel clips make it easy to aid young gymnasts
• A must for spotting and a must for teaching gymnastics
• Nylon guide lines on each side are 5 feet long with grip loops
• Available in 4 Sizes
• Available in 7 colors
A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester. The lines have hooks for easy holding and control of the gymnast. Heavy-weight D-rings and swivel clips make it easy to assert and aid gymnastic activities. A must for spotting and a must for teaching. Nylon guide lines on each side are 5 feet long with grip loops.
Because the belt is not attaches the ceiling the student can do tricks down the mat with the teacher running beside them. A great tool to teach back-bend. spider walk, front limber, front walkover, front changing walkover, back walkover, back changing walkover, nip up, snap down back handspring, aerials and many others. You can also teach round-off back handspring with the belt. You can spot this with one spotter but two is better.
NOTE: These belts are not to be hung or attached to ceiling or above apparatus. Belts must be used with protective padding. All activities using these belts must be strictly controlled and supervised by qualified adult instructors. Belts are intended for floor spotting and low beginner beam spotting, not higher spotting. Weight limit of 150 pounds.
• Length: 29", 32", or 37"
• Available in Black,Blue,Red,Yellow,Green, and Orange
• Extremely durable colored putter
• Tempered step chrome shaft
• No punch-thru grip
• Space age urethane head
• Outwears other non-metal clubs
• Also reduces marks and damage to surfaces
This mini-golf putter is extremely durable with a tempered step chrome shaft, no punch-thru grip, and a space age urethane head that is softer yet it outwears other non-metal clubs. Also reduces marks and damage to surfaces.
Suggested Sizes
37" - Men
32" - Women
29" - Junior (Age 10-12)
These Vinyl-Coated Fitbells offer a bright colorful coating that will not only complement any workout space but also provide extended durability and comfort. Vinyl Fitbells are easy to clean. Perfect for aerobics or fitness. Sold in pairs. Colors might vary from those shown in the pictures.
Give your gymnasium an extra layer of professionalism and protection. EnviroSafe Wall Padding is made of recyclable and recycled material in the United States. EnviroSafe wall padding costs no more than other standard urethane/poly foam panels.
Padding is 24" width x 60", 72", or 84" heights, 2.5" thickness. Foam is 2" Medium-Firm foam, and meets ASTM F-2440 for impact resistance (and option for class A E-84). All Pads are phthalate free and have an antibacterial covering. Available with 1" Nail Margin or Z-Clip mounting.
Specify Color: Maple Green, Royal Blue, Red, Navy Blue, Grey, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange. Please note that the colors shown may vary slightly. Ships freight.
Please allow 6 to 8 Weeks for Delivery
Pads are NOT returnable
This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
• Available in 6 Colors
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
With Nissen EnviroSafe outdoor padding collection you can pad your fences so your players are protected when they’re catching balls on the fly. Attach Backstop Padding to your fence to reduce bounce-back and protect your catcher.
Padding has an 18 oz. cover, and 2" Soft IFD 100 EnviroSafe Foam. The padding's 2' folding sections allow for easy storing during the off season. Brass Grommets 12" apart on all 4 sides for easy attachment to chain link fences. Specify Color: Maple Green, Royal Blue, Red, Navy Blue, Grey, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange. Please note that the colors shown may vary slightly.
Please allow 6 to 8 Weeks for Delivery
Pads are NOT returnable
Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.
To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.
EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.
Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 4 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
These EnviroSafe Non-Folding mats have medium-firm foam, hook and loop closures on 2 or 4 Sides, and an 18 oz. Phthalate-free fire-retardant covering. The 2 inch Medium-Firm foam provides safe cushioning for medium impact activities like gymnastics or cheerleading.
EnviroSafe™ is a green foam product made from 60% recycled and 40% virgin polyester fiber. Excellent cushion resistance with varying degrees of firmness. Safer for environment and end user compared to Urethane, Poly or Rebond foams.
Available in Maple Green, Royal Blue, Red, Navy Blue, Grey, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange. Please note that the colors shown may vary slightly. Ships Freight.
Please allow 6 to 8 Weeks for Delivery
Mats are NOT returnable
Track covers take the beating in high-traffic areas! Let these Track Protectors take the beating in high-traffic areas so your track can stay smooth. Standard or Crossover sizing. Non-woven 16 ounce polypropylene. Top surface retains tough durability, even from cleats. Bottom surface will not leave loose fibers clinging to track surfaces. Heather gray color reflects heat. Binding is hemmed, weighted vinyl that lies flat and stays in place. Choice of 14 binding colors (specify): Maple Green, Royal Blue, Red, Navy Blue, Gray, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange.
Please allow 2 to 4 Weeks for Delivery
This product is not returnable