• This beautifully designed pushup mat will
• Prevent children's hands from being scuffed on the rough pavement
• Attached foam piece provides the perfect stopping point for a pushup
• Ensures that the child is safely executing the exercise
• Made of non-skid fade resistant vinyl
• Won’t tear or rip
• Instructions are embossed on the mat itself
• Mat measures 30" x 20"
This beautifully designed pushup mat will prevent children's hands from being scuffed on the rough pavement. The foam piece attached in the middle also provides the perfect stopping point for a pushup, insuring that the child is safely executing the exercise. Instructions are embossed on the mat itself. Mat measures 30" x 20".
Constructed with heavy-duty steel, finished with bright blue powder-coating for added durability. Designed to hold our Elite, Advantage and Competition hurdles and most other "L" shaped hurdles. Efficiently carries 10 hurdles. Cart dimensions are 39" x 30" x 8.5". Ships oversize. Does not qualify for free shipping.
• For indoor or outdoor use
• Completely portable, rolls anywhere on "No-Mar" rubber tire wheels
• 9" back brace helps prevent tipping
• Size 10' x 8' high without side & top panels - 12' high with top panel
• Unit with sides is 18' wide
• 1 1/4" O.D. galvanized tube frames
• Wire is 11.5 gauge galvanized with 2 1/4" openings
• Wire is attached to frames with 1/4" T x 3/4" W flat strap and 1/8" T x 1" W flat strap
• Freight shipment only
For indoor or outdoor use. Completely portable, rolls anywhere on "No-Mar" rubber tire wheels. 9" back brace helps prevent tipping. Size 10' x 8' high without side and top panels - 12' high with top panel. Unit with sides is 18' wide. 1 1/4" O.D. galvanized tube frames. Wire is 11.5 gauge galvanized with 2 1/4" openings. Wire is attached to frames with 1/4" T x 3/4" W flat strap and 1/8" T x 1" W flat strap. Freight shipment only.
Constructed with lightweight (7 lbs) but stable 14" diameter flat top safety base, 12 gauge steel with rounded edges. Upright is 36" high x 1" diameter, made of 16 gauge galvanized steel tube with permanently attached 3/16" steel ring. Unit suitable for pennant streamers, plastic chain or rope. Available in red or yellow.
• For badminton, deck tennis, and other small net games.
• 1 3/4" galvanized risers, heavy steel base plate, floor tips.
• Sets include 2 bases, two 6" poles and 4 adjustable net holders.
• Note: To be used for small net games only. Not to be used for volleyball.
For badminton, deck tennis, and other small net games. 1 3/4 inch galvanized risers, heavy steel base plate, floor tips. Sets include 2 black bases, two 6 ft poles and 4 adjustable net holders. Note: To be used for small net games only. Not to be used for volleyball. Available in 3 colors.
• Provides a low impact high cardio workout.
• System created by John Brookfield and his "battling ropes"
• Amp up the heart and burn large muscle carbs.
• Use as a single rope or double it for 2 half length ropes when working solo.
• Can also work in pairs.
• Premium rugged non-shed polydacron.
• Available in 2 colors, 2 thicknesses, and 3 lengths
Great instruction tool to teach the basics of coming off the ball low and drive upward. Adjustable entrance with three height positions. Heavy duty 1-5/8" steel tube frame with long lasting powder coated finish. Chutes can be attached with others to replicate entire line. Overall size: 4" L x 5" H. 55 lbs.
This push-pull sled is ideal for developing leg strength and speed. Plate neck accommodates Olympic style plates (not included) if you require more workout weight. Either pull the sled with shoulder harness/straps or push the sled with 12" high push-bar. Unit measures 43"L x 19"W x 14"H and weighs 40 lbs. Sled includes shoulder harness with two straps.Made in the USA.
• Polypropylene grass surface with non-skid foam backing
• Authentic feel of speed, line, and slope.
• Putting cups are 1/4" smaller than regulation size to sharpen aim.
• "Lakes" and "sandtraps" catch missed putts.
• Slight incline develops firmness of stroke.
• Practice chipping like a pro when you chip onto the green from far or near.
• 16" high pyramid cones
• Collapsible and stores flat
• Slot-and-tab assembly
• Can be used for activities like targets, hurdles, or goals
• Some assembly required
• Sets of 6 cones in six colors
These 16" high pyramid cones make physical activity fun and fast. An economical way to get students moving and keep them in top condition. Collapsible and stores flat. Slot-and-tab assembly. Can be used for activities like targets, hurdles, or goals. These plastic corrugated pyramids are available in sets of six. Some assembly required.
• Designed to provide a soft and safer hoop stand than wood or hard plastic
• Simply slide hoops and wands into the tear-drop shaped slit
• stand hoops vertically or horizontally for a variety of move-through activities
• Set includes 1 pair of each color
• Hoops not included.
Designed to provide a soft and safer hoop stand than wood or hard plastic. Simply slide hoops and wands into the tear-drop shaped slit and stand hoops vertically or horizontally for a variety of move-through activities. Set includes 1 pair of each color. Hoops not included.
Includes
• 4 light weight Rally Tyro 2 Paddles
• Four Outdoor Pickleballs
• Rally Net System
The Rally Tyro 2 Set has paddles that are made with smaller grips so that kids and adults with joint trouble can easily use them. They have a slightly textured face to help with putting spin on balls, and a shock-absorbent core that reduces the jolt from impact.
The Rally Net System has a very durable base with less of a curve to it compared to our other systems, making it a good choice if you’re expecting windy conditions or just want to ensure everything stays in place.
18 oz. double-sided vinyl coated nylon. Double-ply multiple stitch handles. Ideal for junior and senior high schools. Light and maneuverable. 3 handles for better control. Dimensions: 25" x 20" x 3" (2 lbs.). Specify color.
PLEASE ALLOW 4 TO 6 WEEKS FOR DELIVERY
18 oz. double-sided vinyl coated nylon. Double-ply multiple stitch handles. Ideal for junior and senior high schools. Light. Maneuverable. 3 handles for better control. Dimensions: 25" x 20" x 6" (5 lbs.). Specify color.
PLEASE ALLOW 4 TO 6 WEEKS FOR DELIVERY
Raise ropes to wall or ceiling after use for easy storage and elimination of possible misuse. Two wall brackets, 60' cordage with weighted end.
• Proudly Made in the USA.
• Trademark designed drop-forged steel horseshoes.
• Ideal for institutional use and organizations.
• Includes equipment necessary for 2-4 person play,
• 4 forged steel Royal horseshoes,
• 2 solid steel stakes (24"), and
• Official rulebook included.
• Comes with an easy to carry, plastic tote.
• NHPA approved.
• Not to be used by anyone under age 13.
• Adult supervision required.
Proudly Made in the USA. The Royal features trademark designed drop-forged steel horseshoes. Ideal for institutional use and organizations. Includes equipment necessary for 2-4 person play, 4 forged steel Royal horseshoes, 2 solid steel stakes (24"), and official rulebook. Comes with an easy to carry, plastic tote. NHPA approved. NOTE: Not to be used by anyone under age 13. Adult supervision required.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
• Available in 6 Colors
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
• Lifetime warranty!
• Made in the USA!
• Not a cheap import!
• Heavy duty 1" galvanized steel construction
• Stores/transports up to 24 scooters
• Made of galvanized steel
• Measures 47" H x 30" W x 18" D
• 8" Rubber wheels
• Holds 24 each 18” cones or 30 each 12” cones
• 8” hard rubber tires
• Lifetime warranty!
• Made in the USA!
• Heavy duty construction
• Made of 1" heavy gauged galvanized steel
• Measures 42” H x 18.5” W x 17” D
• Max cone base size = 11” x 11”
NOTE: Check the base size of your cones before ordering.
Holds 24 each 18" cones or 30 each 12" cones. 8" hard rubber tires. Lifetime warranty! Made in the USA! Heavy duty construction. Made of 1" heavy gauged galvanized steel. Measures 42" H x 18.5" W x 17"D. Max cone base size = 11" x 11"
• Holds 25 each 28” cones
• 10” heavy-duty pneumatic all-terrain wheels
• Lifetime warranty!
• Made in the USA!
• Heavy duty construction
• Made of 1" heavy gauged galvanized steel
• Use indoors or out
• Measures 45”H x 27”W x 21 1/2”D
• Max cone base = 16 1/4” x 16 1/4”
• Weighs 150 lbs. loaded
NOTE: Check the base size of your cones before ordering.
Holds 25 each 28" cones. 10" heavy-duty pneumatic all-terrain wheels. Lifetime warranty! Made in the USA!. Heavy duty construction. Made of 1" heavy gauged galvanized steel. Use indoors or out. Measures 45"H x 27"W x 21 1/2"D. Max cone base = 16 1/4" x 16 1/4". Weighs 150 lbs. loaded. NOTE: This cart is to be used by responsible adults only - not for children.
• Holds 24 each 18” cones or 30 each 12” cones
• Two front easy-roll swivel casters
• 8” hard rubber tires
• Lifetime warranty!
• Made in the USA!
• Heavy duty construction
• Made of 1" heavy gauged galvanized steel
• Measures 42” H x 18.5” W x 17” D
• Patented EZ-Roll design (Pat No. D578,724)
• Max cone base size = 11” x 11”.
NOTE: Check the base size of your cones before ordering.
This patented EZ-Roll Cone Cart has two front easy-roll swivel casters making it the perfect transports for moving your heavy 12" and 18" traffic cones around. The front casters allow you to easily turn corners and maneuver without needing to tilt the cart. Its 1 inch heavy gauged galvanized steel constructions means it will stand up to long-term heavy use. Proudly American Made right in our Ann Arbor Michigan factory!
• Holds 25 each 28" cones
• Two front easy-roll swivel casters
• 10" heavy-duty pneumatic all terrain wheels
• Lifetime warranty!
• Made in the USA!
• Heavy duty construction
• Made of 1" heavy gauged galvanized steel
• Use indoors or out
• Measures 45”H x 27”W x 21 1/2”D
• Max cone base size = 16 1/4" x 16 1/4"
• Weighs 150 lbs. loaded
NOTE: Check the base size of your cones before ordering.
This patented EZ-Roll Cone Cart has two front easy-roll swivel casters making it the perfect transports for moving your heavy 28" traffic cones around. The front casters allow you to easily turn corners and maneuver without needing to tilt the cart. Its 1 inch heavy gauged galvanized steel constructions means it will stand up to long-term heavy use. Proudly American Made right in our Ann Arbor Michigan factory!
• Great for tailgates and catered events
• Allow a single person to transport heavy ice coolers easily with maximum efficiency
• Will hold most standard sized ice chests
• Deep recess prevents from sliding while going around corners or down slopes
• Made of 1" heavy-wall galvanized steel for durability
• Heavy-duty 4" diameter ball-bearing multi-directional rubber casters
• Coolers not included.
• Ext. Dim: 35"H x 28"W x 17"D
• Ins. Dim: 25.5"W x 17"D
These carts allow a single person to transport heavy ice coolers easily with maximum efficiency. The carts will hold most standard sized ice chests, and are designed to hold coolers in a deep recess which prevents them from sliding off the cart while going around corners or down slopes. Made of 1" heavy-wall galvanized steel for durability. Each cart is equipped with heavy-duty 4" diameter ball-bearing multi-directional rubber casters for maximum maneuverability. Coolers not included. Ext. Dim: 35"H x 28"W x 17"D. Ins. Dim: 25.5"W x 17"D.