This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
• Available in 6 Colors
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.
To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.
EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.
Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.
This swing seat is a rotational molded swing made of polyethylene and has a new improved hanger. The dimensions of the seat are 19.75in x 9in x 2in thick. Space between hangers is 16 3/8in. These seats are made wider and studier to hold both small and large children. This seat meets ASTM Standards both commercially and residentially. The seat should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 3000 lbs.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 4 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.