Category

Filters

10-50

Playground Swings

17 products

Showing 1 - 7 of 7 products
View
7 results
Made in the USA
5/16" Vandal-Proof Rubber Swing SeatsBlack 5/16" Vandal-Proof Rubber Swing Seat
5/16" Vandal-Proof Rubber Swing Seats
PG030P

This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.

Learn More
$59.95 Each
Choose options
Made in the USA
3/8" Strap Seat Rubber with Insert3/8" Strap Seat Rubber with Insert
3/8" Strap Seat Rubber with Insert
PG411P

Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.

To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.

EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.

Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.

Learn More
$62.95 Each
Choose options
Made in the USA
Rubber Bumper Swing SeatsRubber Bumper Swing Seats
Rubber Bumper Swing Seats
PG025P

This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.

Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.

The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.

Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.

Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.

Learn More
$65.95 Each
Choose options
Coated Swing Chain - 5 1/2 feetRed 5.5' Coated Swing Chain
Coated Swing Chain
PG426P

These coated chains are perfect for adding a pop of color to any swing set. Available in 5 1/2 ft. or 8 1/2" lengths, the 3/16" chains are coated with 4 foot of bright polymer material sure to brighten up any swing set. The 3/16" chain is 4/O Aught and Grade 30. The links are 1" long and the opening is 1/2" wide, ensuring that it is compatible with most swing set hardware. 

It is essential to note that chain sourced from non-playground manufacturers may not possess quality control and may include weak links or air bubbles. Therefore, purchasing from us ensures that you receive high-quality, reliable equipment. 

These chains are sold individually, providing you with the flexibility to customize your equipment as required.

Learn More
From $35.95 Each
Choose options
Ductile Iron Swing Hangers
Ductile Iron Swing Hangers
PG048P

Made of strong ductile iron and galvanized to prevent rust. These swing hangers feature an "oil-lite" bronze bearing and axle bolt. Threads into the frame with a nut for double protection and extra safety. Available in 2 3/8 inch and 3 1/2 inch sizes.

Learn More
From $31.95 Each
Choose options
Tire Eye BoltTire Eye Bolt Dimensions
Tire Eye Bolts - Set of 3
PG423P

Made to be mounted on tires to connect chains to the tire swivels. Each 3-piece set has an eye bolt, a 2 1/2" bottom washer and a lock tight nut. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Weight is 2 lbs. per set. Tensile Strength 1400 lbs.  Sold in sets of three.

Learn More
$39.95 Each
Wood Beam Swing Hanger
Wood Beam Swing Hanger
PG046P

Made of strong ductile iron and galvanized to prevent rust. Feature an "oil-lite" bronze bearing and axle bolt NOTE: Must be attached to an appropriate beam surface and bolted through with washers and nuts.

Learn More
$23.95 Each