Category

Filters

color-green

Playground Swings

17 products

Showing 1 - 5 of 5 products
View
5 results
Made in the USA
Rubber Enclosed Infant Swing SeatsRed  Enclosed Infant Swing Seat
Rubber Enclosed Infant Swing Seats
PG034P

• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
• Available in 6 Colors


This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.

Learn More
$189.95 Each
Choose options
Made in the USA
5/16" Vandal-Proof Rubber Swing SeatsBlack 5/16" Vandal-Proof Rubber Swing Seat
5/16" Vandal-Proof Rubber Swing Seats
PG030P

This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.

Learn More
$59.95 Each
Choose options
Made in the USA
3/8" Strap Seat Rubber with Insert3/8" Strap Seat Rubber with Insert
3/8" Strap Seat Rubber with Insert
PG411P

Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.

To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.

EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.

Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.

Learn More
$62.95 Each
Choose options
Black Rotational Molded Flat Swing SeatBlue Rotational Molded Flat Swing Seat
Rotational Molded Flat Swing Seats
PG132P

This swing seat is a rotational molded swing made of polyethylene and has a new improved hanger. The dimensions of the seat are 19.75in x 9in x 2in thick. Space between hangers is 16 3/8in. These seats are made wider and studier to hold both small and large children. This seat meets ASTM Standards both commercially and residentially. The seat should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 3000 lbs.

Learn More
$118.95 Each
Choose options
Coated Swing Chain - 5 1/2 feetRed 5.5' Coated Swing Chain
Coated Swing Chain
PG426P

These coated chains are perfect for adding a pop of color to any swing set. Available in 5 1/2 ft. or 8 1/2" lengths, the 3/16" chains are coated with 4 foot of bright polymer material sure to brighten up any swing set. The 3/16" chain is 4/O Aught and Grade 30. The links are 1" long and the opening is 1/2" wide, ensuring that it is compatible with most swing set hardware. 

It is essential to note that chain sourced from non-playground manufacturers may not possess quality control and may include weak links or air bubbles. Therefore, purchasing from us ensures that you receive high-quality, reliable equipment. 

These chains are sold individually, providing you with the flexibility to customize your equipment as required.

Learn More
From $35.95 Each
Choose options