These forged steel shackles provide an alternative to S-hooks with their multiple use capabilities and ease of installation. Their added strength has led some cities and parks to require their use in place of S-hooks. The shackle has a 5/16″ diameter and is paired with a 3/8″ x 1 1/2″ bolt, with a 1/2″ opening at the bolt and up to 1″ at its widest point, allowing for use with chains up to 1/2″ in size. This shackle boasts a tensile strength of 12500 lbs. The shackle has a hardness rating of 212 HBS, while the bolt rates at 176 HBS. With proper use, this product is expected to last up to 5 years under optimal conditions and at least 2 years in harsher environments, although some conditions may require replacement sooner.
This commercial quality S-hook is expertly crafted to fasten chain to swing hangers and swing seats, effectively preventing binding. Additionally, this S-hook is zinc plated, which enhances its ability to resist rust. It’s important to note that S-hooks bought from non-playground manufacturers may contain imperfections and may not be strong enough to endure playground conditions.
Our product boasts an estimated lifespan of up to 5 years in optimal conditions and 2 years in harsh conditions, although certain factors may necessitate replacement sooner. Whether for commercial or residential use, our S-hook is an essential component for your swing set to ensure safety and durability.
Tensile Strength
3/8" Standard = 1543 lbs.
3/8" Large Opening = 1177 lbs.
5/16" Standard = 1126 lbs.
5/16" Large Opening = 745 lbs.
These shackles take the place of S-hooks and need the wrench, PG176P, to open and close. This head makes removal, because of vandalism, more difficult. The overall length is 3 5/16”. The bolts are 3/8” diameter. The inside of the smaller opening is ½” across and the larger opening is ¾”. Unlike S-hooks they can be used multiple times. They are also much easier to install then S-hooks and much stronger. Some cities and parks are requiring their use instead of S-hooks. Use with our swing hangers and chain. The shackle is 212 HBS and the bolt is 176 HBS. The hardness of the bolt in the long needle hardness HRC29 / short needle hardness HRC31. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength 6800 lbs.
This allen wrench has a special hole to accept the pin in the shackle bolt head. Fits both shackles and shackle pendulum swing hangers. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.
These clips are available with a standard or wide opening.
The Standard Clips are 5/16” x 3″. This clip will work on all chains. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 1662 lbs.
The Wide Opening Clips are 3/8” x 4” with a wide opening to fit everything including swing hangers and washer seats. This clip can not be used with our 3/16" coated swing chains. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 2900 lbs.
• Use to fasten children in half bucket swing seats
• Galvanized safety chain covered with a plastic hose
• Fastens across the front of half bucket seat
• The chain is 1/8” and is 12” long
• Weight: .35 lbs.
• Tensile strength: 295 lbs.
Use to fasten children in half bucket swing seats. This galvanized safety chain comes covered with a plastic hose. It has a snap hook and 2 S-hooks for fastening across the front of half bucket seat. The chain is 1/8” and is 12” long. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Weight .35 lbs. each. Tensile strength 295 lbs.
Our swing chains have a smooth zinc finish.
5/16" Short Link Chain
The 5/16" chain has very short links to deter small children from putting their fingers in the links and injuring themselves if they fall off the swing. In Germany and the Netherlands this type of chain is required on playground equipment. National test lab results 5000 lb.. Sold per foot.
3/16″ Chain
Our 3/16″ Trivalent chain is zinc plate chain with trivalent coating that has a much improved resistance to salt spray. This chain meets all ASTM requirements. The coating has a consistent bright finish. This chain would be good in coastal areas. The chain is 4/0 Aught and Grade 30. The links are 1” long and the opening is ½” wide. Any of our S-hooks or Shackles will work with this chain. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile 3200 lbs.. Sold per foot.