• Rugged, heavy-duty vinyl throw-down 16" home bases
• Great indoors or outdoors
• Lightweight yet virtually indestructible
• Set of six (1 each of yellow, blue, green, red, orange, and purple)
Set of six 16" poly home bases. Includes one of each color.
For use with GY149M Mount pegboards on brick or concrete walls. Contains screws to attach backplate to board, lead screw anchors to sink in wall (after drilling holes) and screws to attach plate and board flush with wall . 6" & 12" boards mount at the ends. Complete with all hardware for mounting pegboard to brick or concrete. UPS. CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.
For use with GY124M Mount pegboards on brick or concrete walls. Contains screws to attach backplate to board, lead screw anchors to sink in wall (after drilling holes) and screws to attach plate and board flush with wall . 6" and 12" boards mount at the ends. Complete with all hardware for mounting pegboard to brick or concrete. UPS. CAUTION: Purchaser assumes all mounting liability. Must be mounted to secure surface.
These EnviroSafe Non-Folding mats have medium-firm foam, hook and loop closures on 2 or 4 Sides, and an 18 oz. Phthalate-free fire-retardant covering. The 2 inch Medium-Firm foam provides safe cushioning for medium impact activities like gymnastics or cheerleading.
EnviroSafe™ is a green foam product made from 60% recycled and 40% virgin polyester fiber. Excellent cushion resistance with varying degrees of firmness. Safer for environment and end user compared to Urethane, Poly or Rebond foams.
Available in Maple Green, Royal Blue, Red, Navy Blue, Grey, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange. Please note that the colors shown may vary slightly. Ships Freight.
Please allow 6 to 8 Weeks for Delivery
Mats are NOT returnable
• Will hold up to forty balls of various types
• Made of durable 1" galvanized tubing and rigid wire
• The cart has 4" easy swivel casters
• Large handles for easy pushing/pulling
• Cart measures 36"L x 30"W (36" with wheels) x 36"H
• Ships freight
• Lifetime warranty
This large ball cart/locker will hold up to forty balls of various types. Made of durable 1" galvanized tubing and rigid wire. The cart has 4" easy swivel casters. Large handles for easy pushing/pulling. Cart measures 36"L x 30"W (36" with wheels) x 36"H. Ships freight. Lifetime warranty. Comes fully assembled.
• Organize, store, and transport all of your jump ropes
• Holds approximately 200 ropes
• Galvanized steel with 4 casters
• 71" high & the base is 30" square
Organize, store, and transport all of your jump ropes. Holds approximately 200 ropes. Galvanized steel with 4 casters. 71" high and the base is 30" square
• Preferred model of top pro players.
• Best Choice for: Long life putter, Short to medium drives, Accurate approaches
• Pro 160g to 175g.
• Speed: 2
• Glide: 3
• Turn: 0
• Fade: 2
• Assorted colors
The KC (Ken Climo) Pro Aviar is made from the Aviar driver mold in a firm blend of Pro-line plastic for players who prefer a stiffer disc. Preferred model of top pro players. 160g to 175g.
Curved surface reduces ankle injuries, improves player safety. Dual purpose dummy stepover/blocking. Web handles allow you to use as a regular blocking dummy. Half Round Speed Dummy designed to increase foot speed. 42" L x 16" W x 12" H (9 lbs.)
PLEASE ALLOW 4 TO 6 WEEKS FOR DELIVERY
Curved surface reduces ankle injuries, improves player safety. Dual purpose dummy stepover/blocking. Web handles allow you to use as a regular blocking dummy. Half Round Speed Dummy designed to increase foot speed. 42"L x 16"W x 8"H (7 lbs.).
PLEASE ALLOW 4 TO 6 WEEKS FOR DELIVERY
• This heavy-duty cart is ideal for transporting football equipment
• 1 1/4" heavy-wall galvanized steel frame
• Four large 10" EZ-Roll all-turf pneumatic tires
• Rugged heavy gauge vinyl covered walls
• Will hold an entire set of sideline markers, end zone pylons and chain set
• Use to easily transport weighted dummies and practice shields
• Measures 65.5" Long x 32" Wide x 32.5" High
• Interior dimensions are 63" Long x 29.5" Wide x 19" Deep
• Some assembly required
• Lifetime warranty on frame
This heavy-duty cart is ideal for transporting a variety of football equipment to and from the field. Features include 1 1/4" heavy-wall galvanized steel frame, four large 10" EZ-Roll all-turf pneumatic tires and rugged heavy gauge vinyl covered walls. Will hold an entire field equipment set: sideline markers, end zone pylons and chain set. this versatile cart can also be used to easily transport weighted dummies and practice shields. The cart measures 65.5" Long x 32" Wide x 32.5" High (interior dimensions are 63" Long x 29.5" Wide x 19" Deep). Some assembly required. Lifetime warranty on frame.
• Made with 100% PVC polyvinyl chloride (contains no phthalates)
• Conical and top of base is one continuous layer
• Brilliant color with UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Wide body design ensures stability
• Able to return to their original shape after impact
• Will not mar floors.
• Use as a traffic cone, or for hundreds of phys ed activities
• Available in 3 sizes
12" high with 8.25" square base
18" high with 10.75" square base
28" high with 14.5" square base
These cones are constructed of brilliant fluorescent orange vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors. Virtually indestructible. Will collapse under pressure then spring back into shape. Easy stacking. Can be used for lane markers, crowd control, obstacle courses, boundary markers, marking danger areas, repair areas and driver training.
Knock-down frame of 1" O.D. galvanized steel tubing, 22' wide. 30" high nylon net with rope cable. Some assembly required. Ships UPS. Lifetime warranty on frame only.
The resistor is the lowest priced harness with 10 foot nylon straps available. It develops strength and power by "overloading" the muscles in the sprinting action. Thousands in use nation wide. Harness has 3 connection points.
Track covers take the beating in high-traffic areas! Let these Track Protectors take the beating in high-traffic areas so your track can stay smooth. Standard or Crossover sizing. Non-woven 16 ounce polypropylene. Top surface retains tough durability, even from cleats. Bottom surface will not leave loose fibers clinging to track surfaces. Heather gray color reflects heat. Binding is hemmed, weighted vinyl that lies flat and stays in place. Choice of 14 binding colors (specify): Maple Green, Royal Blue, Red, Navy Blue, Gray, Maroon, Sky Blue, Purple, Yellow, White, Tan, Black, Kelly Green or Orange.
Please allow 2 to 4 Weeks for Delivery
This product is not returnable
• Holds 90 each 9", 12" or 15" poly cones
• Also holds 60 each 12" heavy-duty cones
• Two front easy-roll swivel casters
• 8" hard rubber tires
• 41 1/2”H x 24”W x 16”D
• Lifetime warranty!
• Made in the USA!
• Heavy duty construction
• Made of 1" heavy gauged galvanized steel
• Use indoors or out
• Max cone base size = 8" x 8"
NOTE: Check the base size of your cones before ordering.
This patented EZ-Roll Cone Cart has two front easy-roll swivel casters making it the perfect transports for moving your heavy 9", 12" and 15" poly cones around. The front casters allow you to easily turn corners and maneuver without needing to tilt the cart. Its 1 inch heavy gauged galvanized steel constructions means it will stand up to long-term heavy use. Proudly American Made right in our Ann Arbor Michigan factory!
• Holds 90 each 9”, 12” or 15” poly cones
• Will also hold 60 each 12” heavy-duty cones
• Durable 1" galvanized steel
• 8” hard rubber tires
• Lifetime warranty!
• Made in the USA!
• Measures 41 1/2”H x 24”W x 16”D
• Max cone base size = 8” x 8”
NOTE: Check the base size of your cones before ordering.
Store and transport your polyethylene cones with this durable convenient cart. Simply stack 9", 12" or 15" cones in the "stacking" racks. Durable 1" galvanized steel. Holds 90 each 9", 12" or 15" poly cones. Will also hold 60 each 12" heavy-duty cones. 8" hard rubber tires. Measures 41 1/2"H x 24"W x 16"D. Max cone base size = 8"x 8".
• 64" High target
• The portable lightweight target hoop is made of durable PVC and plastic.
• Versatile 24" diameter targets
• Target can be set up as a disc golf game, target hoop, obstacle, etc.
• Target includes numbered cone and steel ground socket.
• Some assembly required
• NOTE: Target hoop color may vary
• 52" High target
• The portable lightweight target hoop is made of durable PVC and plastic.
• Versatile 24" diameter targets
• Target can be set up as a disc golf game, target hoop, obstacle, etc.
• Target includes numbered cone and steel ground socket.
• Some assembly required
• NOTE: Target hoop color may vary
• 40" High target
• The portable lightweight target hoop is made of durable PVC and plastic.
• Versatile 24" diameter targets
• Target can be set up as a disc golf game, target hoop, obstacle, etc.
• Target includes numbered cone and steel ground socket.
• Some assembly required
• NOTE: Target hoop color may vary
Starter set of 6 plastic corrugated pyramids with 6 Basic Fitness Circuit #1 laminated station cards. Some assembly required.
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 4 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
This 72” high pad fits post up to 1-3/4” diameter. The hook-and-loop fasteners make installing the pad easy. Perfect for portable game standards and tetherball posts. Covered with Safe-Gard™ LeatherLike™ fabric filled with polyurethane foam. The fabric is phthalate-free, flame retardant and anti-microbial.
This tough plastic shaft with lightweight fiberglass dowel can take any beating students can give it. Outdoor set has the same contents except 6 sticks with white blades and 6 sticks with black blades. All shafts are guaranteed for life and made in the USA!
This tough plastic shaft with lightweight fiberglass dowel can take any beating students can give it. Indoor set contains 6 sticks with red blades, 6 sticks with blue blades, 2 ABS goalie sticks and two speed control balls. All shafts are guaranteed for life and made in the USA!