• Utilizes same durable thick-walled pulltruded fiberglass as Gill Collegiate Crossbars
• Meets NFHS and NCAA Specifications
• 14' 10"
The only competition crossbar that can ship Small Package, reducing shipping charges. Ships in 3 pieces and gets assembled in the field. This 3-Piece Pole Vault Cross Bar is made from the same durable thick walled pulltruded fiberglass as standard Pole Vault crossbars but with one big benefit, reduced shipping cost! When properly assembled this bar meets NFHS and NCAA rules but can be shipped overnight if needed.
• Fluorescent orange elastic crossbar
• 1.50 in. poly foam sections to simulate actual size of official crossbar
• Speeds up practice, saves crossbar and prevents injuries from falling crossbars
• Made from foam and rubber
• No assembly required
• Petranoff javelin
• 300g, 400g or 500g javelin
• Long Tom Spire
Designed by former world record holder Tom Petranoff (99.72m). Perfect training tool for javelin throwers. Designed to teach javelin throw "through the point". Can be used both indoors and out. Sturdy polyurethane construction.
Product color may vary
• Hurdles adjust from 6"-42"
• Collapses when hit for safety
• High impact plastic cross board
• Powder coated 1" steel legs
• Set of 3
Set up a course and improve timing and speed with the Champion Sports Adjustable Training Hurdle. This lightweight durable hurdle has an adjustable height range of 6" to 42", in eleven increments so it can continue to grow with you as you advance to the next difficulty level. Great for athletes of all ages and abilities, this training hurdle collapses when hit like a safety precaution.
Replacement cross boards available HERE
• Hurdle adjusts from 6"-42"
• Collapses when hit for safety
• High impact plastic cross board
• Powder coated 1" steel legs
Set up a course and improve timing and speed with the Champion Sports Adjustable Training Hurdle. This lightweight durable hurdle has an adjustable height range of 6" to 42", in eleven increments so it can continue to grow with you as you advance to the next difficulty level. Great for athletes of all ages and abilities, this training hurdle collapses when hit like a safety precaution.
Replacement cross boards available HERE
• A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester
• The lines have hooks for easy holding and control of the gymnast
• Heavy-weight D-rings and swivel clips make it easy to aid young gymnasts
• A must for spotting and a must for teaching gymnastics
• Nylon guide lines on each side are 5 feet long with grip loops
• Available in 4 Sizes
• Available in 7 colors
A 640D nylon belt over a foam rubber case and covered with 640D nylon-polyester. The lines have hooks for easy holding and control of the gymnast. Heavy-weight D-rings and swivel clips make it easy to assert and aid gymnastic activities. A must for spotting and a must for teaching. Nylon guide lines on each side are 5 feet long with grip loops.
Because the belt is not attaches the ceiling the student can do tricks down the mat with the teacher running beside them. A great tool to teach back-bend. spider walk, front limber, front walkover, front changing walkover, back walkover, back changing walkover, nip up, snap down back handspring, aerials and many others. You can also teach round-off back handspring with the belt. You can spot this with one spotter but two is better.
NOTE: These belts are not to be hung or attached to ceiling or above apparatus. Belts must be used with protective padding. All activities using these belts must be strictly controlled and supervised by qualified adult instructors. Belts are intended for floor spotting and low beginner beam spotting, not higher spotting. Weight limit of 150 pounds.
BeamDocks™ are an add-on option usable with all DuraTuff™ Foam Balance Beams: StarterBeams™ (GY490P), Create-A-Beams™ (GY488P), and Curve-A-Beams™ (GY482P). Docks are 10″ diameter hexagonal-shaped units. Each of the 6 sides has a round slot. All Beams have a matching slot. High-impact plastic tube pieces connect the beam lengths to the Dock. Therefore, beams can fan out from a central hub in 6 directions, or create other zig-zag beam patterns. BeamDocks™ open the imagination to dozens of different shapes and balance challenges. Why not let the kids create their own unique beams? Sold in sets of 6 colors.
Super economical, light and easily portable beams attach together in seconds with shatter-proof plugs. Each section is 2' long x 5" wide x 2.5" high for 12 feet of beam. Optional hexagonal BeamDocks open the imagination to dozens of different shapes and balance challenges. Constructed of no-tear, unbreakable Dura-Tuff foam for years of institutional use. Activity guide offers over 30 set-ups and creative uses! Sets include one each of blue, red, yellow, green, purple and orange. BeamDocks sold separately.
12 feet of flowing, curvy balance fun in a beam design so flexible you can configure 15 balance challenges! Each of the sections is 2 feet long x 4.5" wide. Ends can be laid tightly together or connected with unbreakable plastic plugs that insert into the ends. Easy to configure and connect. Made of institutional-tough, tear-resistant Ethafoam for years of use. Each beam includes a pictorial guide with all the "known" designs. Sold in sets of six colors (1 ea. red, yellow, blue, green, orange and purple).
This 8 foot high foul pole kit includes two yellow foam foul poles, reinforcing poles and ground sockets.
Please allow 6 to 8 Weeks for Delivery
VERIFY YOUR COLOR CHOICE
Each order is made to your specification(s) and is not returnable if the incorrect color choice is made.
While you can use Grand Slam Fencing™ for either a baseball outfield fence or a little league fence, this portable fencing solution comes in multiple colors and varying lengths that are perfect for you field.
Soft poly mesh green fencing with 3" yellow, homerun-maker top. Grand Slam Fencing™ is a durable, soft, and easy-to-handle product. Fence height is approximately 4 feet. Grand Slam Fencing™ is available in red, blue, and green with yellow top home run marker. Fencing has holes woven into fabric for insertion of poles (Not included). Available in 3 lengths.
Order poles (BS532D) and optional ground sleeves (BS533D) separately. Complete kits are also available.
Please allow 6 to 8 Weeks for Delivery
Optional 12" long black high gloss matching PVC ground sockets to hold the poles. Each ground socket will have a pointed bottom tip and a cap to cover the socket when pole is removed.
Please allow 2 to 4 Weeks for Delivery
Made from "furniture grade" PVC that safely bends to 90 degrees on impact. 60" High with white PVC pointed bottom tip and top cap with latch for fence attachment.
These optional poles allow you to place place poles every 5', adding stability and reduced sagging to our TempFence Kits. The additional poles keep your fencing system more taut and resistant to movement during wind, for an even more attractive and durable outfield solution.
Please allow 6 to 8 Weeks for Delivery
VERIFY YOUR COLOR CHOICE
Each order is made to your specification(s) and is not returnable if the incorrect color choice is made.
Create your own baseball and softball field with portable outfield fences. These durable yet soft, and easy-to-handle temporary fencing kits are quick and easy to set up and take down. Fence height is approximately 4 feet.
Grand Slam Fencing™ kits are available in 100’, 150’, 314’ (for 200’ home run distance) and 471’ (for 300’ home run distance) lengths. Kits include: poles, outfield fencing and auger for drilling holes in the ground - fits most power drills. Optional ground sleeves (BS533D) not included - sold separately. Ships Freight
Each kit includes enough poles for them to be placed 10' apart. Additional poles (BS532D) are available so you can place poles every 5', adding stability and reduced sagging. The additional poles keep your fencing system more taut and resistant to movement during wind, for an even more attractive and durable outfield solution.
Available in Green, Red and Royal Blue
Note: These kits DO NOT include sideline fencing - only outfield fencing.
SHIPS FREIGHT
Please allow 6 to 8 Weeks for Delivery
• All-steel construction
• Used for laying single sided tape
• Holds 1" or 2" width
• Silver
This Tape Layer helps you create perfectly straight lines on your gym floor. Featuring an all-steel construction, this tape layer works for 1” or 2” single sided tape.
Nylon bag for convenient storage and transportation of up to six sidewalls.
• Heavy-Duty Black Fabric
• 2 Formed Rubber Handles for Lifting
• 1 Formed Rubber Handle for Rolling
• Reinforced Steel Base Plate
• Heavy-Duty Zipper
• Built in E-Z Glide Wheels
• An exceptional tot seat
• 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length
• Made of 5/16” thick EPDM rubber
• One piece insert to resist vandalism
• Welded triangular hardware.
• EPDM long lasting rubber material resists crazing, cracking and oxidizing.
• Rubber won't rub off on children’s clothes
• Hold up well in extreme temperatures, both very hot and very cold.
• Available in 5 Colors
An exceptional tot seat with tab and ring for adding an PG069P Safety Chain which is sold separately. The dimensions of the seat are 12” diameter, 8.5” in depth and the back holes are 5 3/16” in length. It is made of 5/16” thick EPDM rubber with a one piece insert to resist vandalism and welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
• Fully enclosed one piece infant seat
• Helps prevent small children from falling out
• 39” circumference
• 9.5” deep
• The front leg opening is 5” leg with the back opening 4.75”
• Made with a steel insert encased in 70duro EPDM rubber
• Heavy duty rust resistant welded triangular hardware
This one piece infant swing seat is fully enclosed which helps prevent small children from falling out. The dimensions of the seat are 39" circumference, 9.5" deep, the front leg opening is 5" leg with the back opening 4.75". It is made with a steel insert that is encased in 70duro EPDM rubber with heavy duty rust resistant welded triangular hardware. EPDM is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children’s clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that does not rub off on children’s clothes, and lasts much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. The steel triangles and plates are riveted to the seat with galvanized rivets. Each triangle is welded together so they cannot be pulled apart and pulled off the seat. This seat is made to the highest standards available for the benefit and well-being of the children that use them.
Our newly designed swing seat is a must-have addition to any swing set. We’ve removed the grommets and all hardware is now internal, ensuring a sleek and modern design. The seat dimensions are 26 inches by 6 inches and 3/8 inch thick, providing a comfortable and sturdy platform for your child to swing on.
To connect the seat to the chain, you’ll need to use our large end H140 S-hook or H172 H-Shackle, both of which are compatible with our swing seats. The seat is equipped with four stainless steel washers that are welded to a 301 full hard stainless steel insert, which is then molded into the seat. The insert is covered with EPDM material, which helps withstand harsh weather conditions and fading.
EPDM (Ethylene-propylene-diene-monomer) is a synthetic rubber material that prevents crazing, cracking, and oxidizing. Unlike natural rubber, which is often made from recycled tires and can wear off on children’s clothes, EPDM rubber is specially designed for our swing seats and does not rub off on clothes. Seats made of EPDM rubber last much longer than natural rubber swings and hold up well in extreme temperatures, both hot and cold.
Our swing seats are made to the highest standards available, with a remarkable tensile strength of 3600 lbs. Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner.
This vandal-proof swing seat features galvanized welded triangular hardware that makes it one of the sturdiest swing seats available. The dimensions of the seat are 24in x 6in x 5/16in or 30 1/4in hanger to hanger. It is made with 70 EPDM rubber with insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc, and you are never sure what the actual rubber.
This swing seat is designed for enhanced safety and comfort, with an extra piece of fluted rubber at the front and back of the seat that serves as a cushion bumper. The seat dimensions are 24 inches by 6 inches and 11/16 inches thick, or 30 ¼ inches from hanger to hanger.
Made with EPDM rubber, this swing seat resists crazing, cracking, and oxidizing. Unlike natural rubber, which often wears off on children’s clothes and cracks over time, EPDM rubber is specially designed for our swing seats and lasts longer. It also holds up well in extreme temperatures, both hot and cold.
The swing seat is equipped with galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. The triangles are welded together for added strength and safety, and the plate is 1/16 inch thick and made of stamped galvanized steel. The seat insert is made of 1075 rounded edge steel, which is full hard, painted with a non-rusting adhesive, and coated with rubber that is ¼ inch to 3/8 inch thick. The edges of the insert are rounded to prevent injuries from sharp edges.
Our swing seats are made to the highest standards available, with hidden safety features that are not present in other supplier’s seats due to the added cost. We believe that these features benefit the strength of our swings and the well-being of the children who use our equipment.
Under optimal conditions, this swing seat should last up to 5 years, even in harsh weather conditions. However, please note that some conditions may require replacement sooner. The seat has a tensile strength of 3100 lbs.